Table: Subpart C Data Elements Subject to August 31, 2011 Deadline

Rule Citation
(40 CFR Part 98, Subpart C)
Specific Data Elements for Which Reporting Date is Changed
98.36(b)(9)(iii) An estimate of the heat input from each type of fuel listed in Table C– 2 of this subpart that was combusted in the unit during the report year.
98.36(c)(2)(ix) An estimate of the heat input from each type of fuel listed in Table C–2 of this subpart that was combusted during the report year in the units sharing the common stack or duct during the report year
98.36(d)(1)(iv) The total heat input from each fuel listed in Table C–2 that was combusted during the year (except as otherwise provided in §98.33(c)(4)(ii)(B)), expressed in mmBtu.
98.36(d)(2)(ii)(G) Annual heat input from each type of fuel listed in Table C–2 of this subpart that was combusted during the reporting year, expressed in mmBtu.
98.36(d)(2)(iii)(G) Annual heat input from each type of fuel listed in Table C–2 of this subpart that was combusted during the reporting year, expressed in mmBtu.
98.36(e)(2)(i) For the Tier 1 Calculation Methodology, report the total quantity of each type of fuel combusted in the unit or group of aggregated units (as applicable) during the reporting year, in short tons for solid fuels, gallons for liquid fuels and standard cubic feet for gaseous fuels, or, if applicable, therms or mmBtu for natural gas.
98.36(e)(2)(ii)(A) The total quantity of each type of fuel combusted in the unit or group of aggregated units (as applicable) during each month of the reporting year. Express the quantity of each fuel combusted during the measurement period in short tons for solid fuels, gallons for liquid fuels, and scf for gaseous fuels.
98.36(e)(2)(ii)(C) The high heat values used in the CO2 emissions calculations for each type of fuel combusted during the reporting year (HHV value for each calendar month in which HHV determination is required).
98.36(e)(2)(ii)(D) If Equation C–2c of this subpart is used to calculate CO2 mass emissions, report the total quantity (i.e., pounds) of steam produced from MSW or solid fuel combustion during each month of the reporting year, and the ratio of the maximum rate heat input capacity to the design rated steam output capacity of the unit, in mmBtu per lb of steam.
98.36(e)(2)(iv)(A) The quantity of each type of fuel combusted in the unit or group of units (as applicable) during each month of the reporting year, in short tons for solid fuels, gallons for liquid fuels, and scf for gaseous fuels.
98.36(e)(2)(iv)(C) The carbon content and, if applicable, gas molecular weight values used in the emission calculations (including both valid and substitute data values). For each calendar month of the reporting year in which carbon content and, if applicable, molecular weight determination is required, report a value of each parameter. If multiple values of a parameter are obtained in a given month, report the arithmetic average value for the month. Express carbon content as a decimal fraction for solid fuels, kg C per gallon for liquid fuels, and kg C per kg of fuel for gaseous fuels. Express the gas molecular weights in units of kg per kg-mole.
98.36(e)(2)(iv)(F) The annual average HHV, when measured HHV data, rather than a default HHV from Table C–1 of this subpart, are used to calculate CH4 and N2O emissions for a Tier 3 unit, in accordance with §98.33(c)(1).
98.36(e)(2)(iv)(G) The value of the molar volume constant (MVC) used in Equation C–5 (if applicable).
98.36(e)(2)(vi)(C) Stack gas flow rate and (if applicable) stack gas moisture content.
98.36(e)(2)(viii)(A) The total amount of sorbent used during the report year, in short tons.
98.36(e)(2)(viii)(B) The molecular weight of the sorbent.
98.36(e)(2)(viii)(C) The ratio (‘‘R’’) in Equation C–11 of this subpart.
98.36(e)(2)(ix)(D) The carbon-based F-factor used in Equation C–13 of this subpart, for each type of fossil fuel combusted, in scf CO2 per mmBtu.
98.36(e)(2)(ix)(E) The annual average HHV value used in Equation C–13 of this subpart, for each type of fossil fuel combusted, in Btu/lb, Btu/gal, or Btu/scf, as appropriate.
98.36(e)(2)(ix)(F) The total quantity of each type of fossil fuel combusted during the reporting year, in lb, gallons, or scf, as appropriate.
98.36(e)(2)(x)(A) The results of each quarterly sample analysis, expressed as a decimal fraction (e.g., if the biogenic fraction of the CO2 emissions from MSW combustion is 30 percent, report 0.30).
98.36(e)(2)(xi) When ASTM methods D7459–08 and D6866–08 are used to determine the biogenic portion of the annual CO2 emissions from a unit that co-fires biogenic (other than MSW) and non­biogenic fuels, you shall report the results of each quarterly sample analysis, expressed as a decimal fraction (e.g., if the biogenic fraction of the CO2 emissions is 30 percent, report 0.30).