- Indianapolis, IN
- Evansville, IN
- Burlington, IA
- Des Moines, IA
- Michigan City, IN
For more than 20 years, Trinity Consultants has assisted facilities in the aerospace industry with regulatory compliance and environmental management issues.
Trinity has a long history of assisting facilities with their regulatory compliance and environmental management systems.
Trinity helps chemical and pharmaceutical manufacturers to achieve regulatory and environmental compliance.
Trinity has assisted clients with nearly 500 power-related projects, offering an array of services.
Due to their nature, “general manufacturing” facilities are often faced with reviewing a wide range of regulations to determine applicability.
Trinity provides a variety of services to government entities, including environmental permitting and compliance management.
Trinity Consultants has long been committed to assisting lime and aggregates facilities with their regulatory compliance needs.
Trinity takes pride in understanding the regulatory issues affecting our clients’ facilities and their industry.
Oil and gas facilities must contend with a variety of regulatory compliance and environmental management demands.
Trinity helps petroleum refineries to achieve compliance with complex environmental regulatory requirements.
Trinity Consultants has long been committed to assisting cement facilities with their regulatory compliance and environmental management needs.
Trinity has extensive experience assisting the pulp and paper industry with its regulatory compliance and environmental management requirements.
Railroads are faced with rapidly evolving state, regional, and federal regulatory framework in the United States.
For more than 25 years, Trinity Consultants has assisted facilities in the semiconductor industry.
For nearly 30 years, Trinity Consultants has assisted facilities such as those in the highly regulated wood products industry.
In the final months of the Obama administration, the U.S. Environmental Protection Agency (EPA) finalized several important environmental rules that may affect many facilities across many industries, including new rules on refrigerant management, »
The Connecticut Department of Energy and Environmental Protection (CTDEEP) developed a State Mitigation Plan (SMP) under the October 2016 Volkswagen Consent Decree. The draft plan outlines the mitigation projects that the CTDEEP proposes to »
Trinity recently opened an Albany, New York office under the leadership of Brian Noel. Brian brings more than 20 years of industrial experience, most focused on air compliance and air pollution control. He previously worked for one of the »
The new ISO 14001:2015 standard incorporates several new themes as well as introduces a new organizational structure for environmental management system (EMS) design and implementation. Perhaps the most significant theme is the need to incorporate »
We are excited to bring you 3 updates to your air dispersion modeling software. The new enhancements and features in these updates include the latest U.S. EPA executables as well as improved options to expedite model run time.BREEZE AERMOD Version »
Trinity's Environmental Quarterly (EQ) magazine covers environmental regulatory developments as well as topics related to corporate environmental performance.
all issues from 2009
These papers, presentations, and articles were authored by the staff of Trinity Consultants for presentation at various conferences.
all papers & presentations
Since its founding in 1974, Trinity has expanded its geographic footprint and breadth of services. We attribute our continued growth to a focus on cornerstone values of top-notch technical performance and excellence in client service.
We've been hard at work to bring you software updates for BREEZE CALPUFF and 3D Analyst. The latest versions of these software, which are available today, are packed with new, resourceful features that will make air quality modeling easier for you, »
BREEZE Software, the market-leading provider of dispersion modeling software used by environmental professionals around the world, is excited to announce the release of BREEZE AERMOD Version 7.11. The new enhancements and features in this release »
BREEZE Software is excited to release the highly anticipated ExDAM Version 8.6. Our team has been working to bring you updates requested from clients around the globe. ExDAM 8.6 enables you to design and analyze the modeling scenario more quickly to »
Due to advances in scientific knowledge, higher resolution raw data, stringent air quality standards, and changing regulations, environmental modeling is demanding more and more from EHS professionals and their computers. All of these influences »
The U.S. EPA has proposed a number of revisions to the Guideline on Air Quality Models, published as Appendix W to 40 CFR Part 51 (Appendix W) in 2005, many of which are discussed in depth here. The proposed revisions include a large amount of new »
Since the early 2000's, the American Petroleum Institute (API) has supported the SANGEA™ software tool for petroleum, natural gas and petrochemical companies to quantify greenhouse gas (GHG) emissions and to standardize »
While most air dispersion modeling is conducted using meteorological data from recent past years and historical or projected emissions data, models can also be used with real-time or short-term forecast meteorological and emissions data to estimate »
EPA recently proposed its potential enforcement initiatives for the years 2017 through 2019, targeting what it views as the most important environmental problems where non-compliance is a significant contributing factor and where enhanced »
BREEZE®, the market-leading air dispersion modeling software used by environmental professionals around the world, released a new version of AERMET, the meteorological data preprocessing software for AERMOD. This version integrates the latest U.S. »
BREEZE AERMOD 7.10.1 is a minor update that includes improvements and bug fixes. With these fixes, BREEZE AERMOD continues to provide the most complete air quality modeling system available in the market today.Specifically, BREEZE AERMOD 7.10.1 »
BREEZE created a product tour video series for BREEZE Incident Analyst to assist users in learning the very basics of using the software. The series of five videos explores how to: use the intuitive user-friendly interface, modify existing chemicals »
BREEZE Software, the market-leading provider of dispersion modeling software used by environmental professionals around the world, released a new version of its powerful BREEZE Incident Analyst, an accidental chemical release and consequence »
BREEZE Software, the market-leading provider of dispersion modeling software used by environmental professionals around the world, released a new version of BREEZE AERSCREEN, an intuitive screening air quality modeling system based on U.S. EPA »
Failure to identify and mitigate explosion hazards is a persistent cause of industrial accidents, impacting sites ranging from fertilizer storage facilities to refineries. While some explosion consequence assessments are performed to comply with »
Most emissions of oxides of nitrogen from combustion and other source process emissions are in the form of NO and other oxides; however the related National Ambient Air Quality Standard (NAAQS) is for nitrogen dioxide (NO2). Consequently, EPA has »
According to the Verdantix Green Quadrant report for EH&S software, common EH&S function plays a leading role in selecting and funding EH&S software. The specific capabilities and areas of functionality that EH&S leaders look for »
T3, a division of Trinity Consultants, developed a new, Web-based compliance task tracking service, Compliance Sentinel, to help companies track tasks and deadlines, stay compliant, and avoid fines associated with the many complex regulatory »
Signed in 2012, the Hazardous Waste Electronic Manifest Establishment Act authorized EPA to implement a national electronic manifest system for waste handlers to complete, sign, transmit, and store manifest information electronically. Trinity »
AERMODOn December 24, 2013, U.S. EPA released an updated version of the AERMOD model (v13350), as well as the meteorological preprocessing program, AERMET (v13350). The new versions are not anticipated to impact results significantly; rather the »
T3’s Pocket Solutions line of tools have historically consisted of three different products – VEMS, PDMS, and QuickList. VEMS has been a successful tool with the very limited scope of performing visible emissions monitoring. Similarly, the PDMS tool »
Since the early 2000’s, the American Petroleum Institute (API) has supported the SANGEATM software tool for petroleum, natural gas and petrochemical companies to quantify greenhouse gas (GHG) emissions and to standardize emissions reporting. »
BREEZE®, the market-leading provider of air dispersion modeling software used by environmental professionals around the world, today announced the release of Incident Analyst 1.2 for accidental chemical releases and consequence modeling. It »
An Urgent Need for Centralized SoftwareMost companies do not have adequate systems in place to meet current and future needs for Sustainability Performance and Environmental Compliance management. Manual, unlinked, and disparate systems (such as »
Effective environmental, health, and safety (EH&S) management in the last few years has evolved into an urgent, critical business issue. As a result, EH&S departments are asked to manage to higher standards, often with fewer. Current »
Environmental compliance requirements at complex industrial facilities involve extensive data collection, review, validation, documentation, communication, and reporting. Environmental staff members are often overwhelmed with daily scheduled and »
Trinity’s BREEZE Software team provides two powerful modeling software tools that enable environmental and safety professionals to analyze and prevent a variety of hazards. BREEZE Incident Analyst (BIA) calculates toxic dispersion from dense or »
Finding an off-the-shelf compliance management software solution that meets EHS needs across all functional areas is difficult. As a result, engineers use disjointed spreadsheets and paper documents that can easily become a compliance tracking »
Many industrial facilities with pollutant emitting units subject to regulatory emissions limits must implement sophisticated Continuous Emissions Monitoring Systems (CEMS) to demonstrate compliance. Regulations that contain CEMS requirements include »
SANGEA-4 is a desktop database program with a user-friendly interface that can be used to manage various types of sources throughout a large entity for corporate and/or regulatory reporting requirements. In order to build a solution that would »
Last year a manufacturing company chose T3, a division of Trinity Consultants that implements EH&S information management solutions, to implement an EH&S management information system (EMIS) at three of its facilities. The manufacturer »
June 22, 2011 (Dallas, TX) – T3, a division of Trinity Consultants that specializes in implementing EH&S information management solutions, announces that it has developed a tool to facilitate electronic reporting of greenhouse gas emissions that »
For over 25 years, BREEZE Software has developed a wide range of applications including air dispersion, accidental release, and explosion safety assessment models. In addition to the BREEZE product line, the development staff evaluates, develops, »
Dallas (December 1, 2009)—On February 9-10, 2010, Trinity Consultants/T3 will host the EH&S Information Management Workshop & Expo in Dallas, TX. The program is tailored to provide an information exchange and learning environment on »
Despite challenging economic circumstances, environmental compliance is a business obligation that cannot be ignored. However, regulatory compliance is not the only aspect of environmental management that should be considered. Careful »
BREEZE Software releases its first update to AERMOD/ISC Version 7, first introduced in early 2009. The 7.1 Version includes enhancements requested by current users. We will explore four of these new features. The new roadway tool allows users to »