For more than 20 years, Trinity Consultants has assisted facilities in the aerospace industry with regulatory compliance and environmental management issues.
Trinity has a long history of assisting facilities with their regulatory compliance and environmental management systems.
Trinity helps chemical and pharmaceutical manufacturers to achieve regulatory and environmental compliance.
Trinity provides dispersion modeling, permitting, and compliance support for coastal operations in the Outer Continental Shelf, Deepwater Ports, and liquefied natural gas terminals.
Trinity has assisted clients with nearly 500 power-related projects, offering an array of services.
Trinity Consultants assists food and beverage manufacturers with a wide variety of environmental permitting and compliance needs including Dust Hazards Analysis and refrigerant management.
Due to their nature, “general manufacturing” facilities are often faced with reviewing a wide range of regulations to determine applicability.
Trinity provides a variety of services to government entities, including environmental permitting and compliance management.
Trinity Consultants has long been committed to assisting lime and aggregates facilities with their regulatory compliance needs.
Trinity takes pride in understanding the regulatory issues affecting our clients’ facilities and their industry.
Oil and gas facilities must contend with a variety of regulatory compliance and environmental management demands.
Trinity helps petroleum refineries to achieve compliance with complex environmental regulatory requirements.
Trinity Consultants has long been committed to assisting cement facilities with their regulatory compliance and environmental management needs.
Trinity has extensive experience assisting the pulp and paper industry with its regulatory compliance and environmental management requirements.
Railroads are faced with rapidly evolving state, regional, and federal regulatory framework in the United States.
For more than 25 years, Trinity Consultants has assisted facilities in the semiconductor industry.
Trinity prepares hundreds of air quality compliance reports for landfills and industrial facilities across the United States on an annual basis.
Trinity Consultants has performed nearly 800 environmental permitting and compliance projects for clients with terminal operations, providing cost-effective, timely solutions that enhance compliance while maintaining operational flexibility.
For nearly 30 years, Trinity Consultants has assisted facilities such as those in the highly regulated wood products industry.
Leak detection and repair (LDAR) programs live and die by their details. As years pass after the implementation of an LDAR program, and the staff involved either retire or move on to other assignments, it is easy for those details to start to lose »
Earlier this week, Governor Laura Kelly recommended Kansas stay in Phase 3 of the "Ad Astra" plan for at least two more weeks. Trinity contacted Gyanendra Prasai (Air Permitting Chief) and Connie Ellis (Air Compliance, Enforcement, Asbestos, and KS »
Jim Eggenschwiler is the Director of Trinity's Global Trade and Chemical Regulations Services group. Jim is an international trade and regulatory attorney with more than 30 years continuous growth as a Global Trade Compliance authority and as a »
The Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) was enacted by Congress in 1980 and amended in 1986. Also referred to as the Superfund law, CERCLA's major emphasis is on cleaning up inactive hazardous waste sites »
BREEZE®, the market-leading provider of EHS software used by environmental professionals worldwide, announces the release of the BREEZE TankESPTM Software Product Suite Version 5.1 for calculating air emissions from liquid storage tanks. Industrial »
Trinity's Environmental Quarterly (EQ) magazine covers environmental regulatory developments as well as topics related to corporate environmental performance.
all issues from 2009
These papers, presentations, and articles were authored by the staff of Trinity Consultants for presentation at various conferences.
all papers & presentations
Since its founding in 1974, Trinity has expanded its geographic footprint and breadth of services. We attribute our continued growth to a focus on cornerstone values of top-notch technical performance and excellence in client service.
An ever-increasing universe of wastes and secondary materials are being redirected into re-use and reclamation programs as fuels, process raw materials, and products. Trinity provides program and compliance support to generators, fuel manufacturers and processors, and energy recovery and beneficial reuse program end users. We work with companies at both the corporate and plant level, to provide strategic guidance, regulatory guidance and interpretation, and tailored site-specific and state-specific compliance support. Related services include: Alternative fuels and raw materials program support Compliance support, operating plans, and training Acceptance and management plans Non-Hazardous Secondary Materials (NHSM) guidance Legitimacy evaluations and documentation Beneficial use determinations Recordkeeping, reporting, and notifications For assistance, please contact Trinity at (800) 229-6655.
Waste Management: Combustion Specialty Services Combustion of hazardous wastes, non-hazardous wastes, and secondary materials is subject to overlapping regulatory requirements for waste combustors and energy recovery operations implemented to fulfill the Clean Air Act (CAA) and Resource Conservation and Recovery Act (RCRA). Trinity staff have been involved in industry and regulatory work groups for these regulations since their inception decades ago, through each new regulation that has been enacted. We continuously work with facilities to ensure critical implementation plans are developed and ongoing compliance is maintained. Consequently, we are uniquely able to help your facility navigate the solid and hazardous waste provisions of a RCRA Part B as well as the various National Emissions Standards for Hazardous Air Pollutants (NESHAPs) such as the Hazardous Waste Combustor MACT (HWC MACT) or the Commercial and Industrial Solid Waste Incinerator Rule (CISWI). Some of our related expert services include: HWC MACT implementation CISWI interpretation and implementation Construction and operating permitting support Compliance plans and training Comprehensive emissions stack test planning, oversight, and report development Emissions studies and control strategies Multi-pathway risk assessments Regulatory agency and public communications support Comprehensive and targeted compliance auditing What is Combustion Specialty Combustion specialty services applies to all units that combust materials other than traditional fossil fuels, including coal, natural gas, propane, fuel oil, diesel, etc. The list of non-traditional (or alternative) type fuels is extensive and includes fuels such as, but not limited to, the following: Hazardous wastes Spent acids Liquids, including waste oils Municipal wastes Medical wastes Agricultural byproducts Scrap wood Scrap tires Plastics Paper products Who needs Combustion Specialty Services Trinity's serves a wide range of industrial clients with combustion services including: Hazardous waste combustors Commercial and industrial solid waste incineration operators Hospital, medical, and infections waste incinerators Large municipal waste combustors Other solids waste incinerators Industrial boilers & energy recovery units Portland cement plants For assistance with Combustion Specialty Services, contact us toll-free at (800) 229-6655
Large Scale Facilities Trinity works with commercial and non-commercial hazardous waste treatment, storage, and disposal facilities (TSDFs), recyclers, and reclaimers of all sizes, to ensure your facility complies with complex permitting and day-to-day requirements. Our services include: RCRA permit application development, modifications, and renewals Baseline and ongoing compliance audits and compliance evaluations Operating plans and training Recordkeeping, notifications, and reporting Corrective action Closure and post-closure plans and implementation Regulatory agency and public communications support Waste Generators We understand the nuances of the regulations for waste generators and can assist you in implementing your program. Trinity is poised to assist your facility in determining regulatory applicability and developing an appropriate compliance program that addresses applicable industrial and solid/hazardous waste programs for your operating facility. Comprehensive environmental compliance and strategic advice Waste determinations and characterization for the full spectrum of waste types Hazardous secondary materials processing and legitimacy evaluations Special waste approvals Hazardous Waste Generator guidance Large Quantity Generator (LQG) v Small Quantity Generator (SQG) v Very Small Quantity Generator (VSQG) Universal Waste Management Waste minimization programs Monitoring, recordkeeping, and reporting Permitting Third party waste handler/receptor audits General and custom training Multimedia and targeted compliance evaluations Support to facilities seeking off-site waste management services We also can provide assistance with onsite industrial landfills, from landfill design and permitting (including hydrogeologic investigations) to landfill closure plans and implementation, and oversight of landfill construction/closure activities. For assistance, contact Trinity at (800) 229-6655.