- New Orleans, LA
- Salt Lake City, UT
- Washington, DC
- Brunswick, GA
- Charleston, WV
For more than 20 years, Trinity Consultants has assisted facilities in the aerospace industry with regulatory compliance and environmental management issues.
Trinity has a long history of assisting facilities with their regulatory compliance and environmental management systems.
Trinity helps chemical and pharmaceutical manufacturers to achieve regulatory and environmental compliance.
Trinity provides dispersion modeling, permitting, and compliance support for coastal operations in the Outer Continental Shelf, Deepwater Ports, and liquefied natural gas terminals.
Trinity has assisted clients with nearly 500 power-related projects, offering an array of services.
Due to their nature, “general manufacturing” facilities are often faced with reviewing a wide range of regulations to determine applicability.
Trinity provides a variety of services to government entities, including environmental permitting and compliance management.
Trinity Consultants has long been committed to assisting lime and aggregates facilities with their regulatory compliance needs.
Trinity takes pride in understanding the regulatory issues affecting our clients’ facilities and their industry.
Oil and gas facilities must contend with a variety of regulatory compliance and environmental management demands.
Trinity helps petroleum refineries to achieve compliance with complex environmental regulatory requirements.
Trinity Consultants has long been committed to assisting cement facilities with their regulatory compliance and environmental management needs.
Trinity has extensive experience assisting the pulp and paper industry with its regulatory compliance and environmental management requirements.
Railroads are faced with rapidly evolving state, regional, and federal regulatory framework in the United States.
For more than 25 years, Trinity Consultants has assisted facilities in the semiconductor industry.
Trinity prepares hundreds of air quality compliance reports for landfills and industrial facilities across the United States on an annual basis.
Trinity Consultants has performed nearly 800 environmental permitting and compliance projects for clients with terminal operations, providing cost-effective, timely solutions that enhance compliance while maintaining operational flexibility.
For nearly 30 years, Trinity Consultants has assisted facilities such as those in the highly regulated wood products industry.
On April 12, 2019, EPA published in the Federal Register, at 84 Fed. Reg. 15,046, a proposed rule, titled “Stationary Combustion Turbines Residual Risk and Technology Review” (RTR), to address the results of the review for stationary combustion »
On November 26, 2019, the Lane Regional Air Protection Agency (LRAPA) released the Cleaner Air Oregon (CAO) prioritization results, which identified facilities in the Eugene/Springfield area that will be called into the program during the first 12 »
Trinity announces that it has acquired Air Noise Environment Pty Ltd (ANE), an environmental consulting firm located in Brisbane, Australia. ANE provides broad air quality and acoustic assessment services, from source emission testing to control »
Learning that your site will undergo a 40 CFR75 (aka Part 75) field audit can be a very challenging experience for any system owner. If you or your plant management receive a field audit notification (via phone call, e-mail, vicious rumor, etc.), »
Leak Detection and Repair (LDAR) involves finding facility components that are leaking and fixing them. The U.S. Environmental Protection Agency (EPA) has a long history of regulating industries (such as petroleum refining and chemical »
Trinity's Environmental Quarterly (EQ) magazine covers environmental regulatory developments as well as topics related to corporate environmental performance.
all issues from 2009
These papers, presentations, and articles were authored by the staff of Trinity Consultants for presentation at various conferences.
all papers & presentations
Since its founding in 1974, Trinity has expanded its geographic footprint and breadth of services. We attribute our continued growth to a focus on cornerstone values of top-notch technical performance and excellence in client service.
Predicting what worker exposures will be to chemicals and particles can be invaluable for many reasons, such as to estimate (1) exposures that happened in the past; (2) anticipated exposures during design and planning phases; (3) exposure where no quantitative method exists or are difficult to measure; or (4) peak exposures, to name just a few. Although it is difficult to model these exposures precisely, modeling tools are a proven technique to improve the ability of the industrial hygienist to identify exposure scenarios that may exceed health-based exposure limits. This course will teach the fundamental concepts of modeling worker exposure and demonstrate the use of the American Industrial Hygiene Association’s IHMOD freeware. Opportunities for class participation and hand-on exercises will be provided. A laptop with Microsoft Excel software is recommended.
|Classroom||Nov 11, 2020 - 1:00 PM - 5:00 PM||New Orleans, LA|
This one-day "crash" course introduces those new to the field of industrial hygiene, or those looking to learn about the field of industrial hygiene, to the fundamental concepts of anticipation, recognition, evaluation, and control of occupational exposure to chemicals and noise. Topics are presented in a practical and interactive manner and explore how exposure occurs, application of Occupational Exposure Limits, the health effects of chemicals and noise, approaches to evaluating and measuring chemical and noise exposures, and the essentials of exposure control.
|Classroom||Mar 17, 2020 - 8:00 AM - 5:00 PM||Dallas, TX|
|Classroom||Sep 22, 2020 - 8:00 AM - 5:00 PM||New Brunswick, NJ|
This one-day, hands-on course teaches essential field industrial hygiene monitoring methods. The basic science behind these methods and the "tricks of the trade" are demonstrated by experienced industrial hygienists and practiced by the students. Topics include real-time and integrated chemical and noise sampling techniques, assembling and calibrating sampling trains, and interacting with industrial hygiene laboratories.
|Classroom||Mar 18, 2020 - 8:00 AM - 5:00 PM||Dallas, TX|
|Classroom||Sep 23, 2020 - 8:00 AM - 5:00 PM||New Brunswick, NJ|
This advanced 1-day course advances the knowledge of a practicing industrial hygienist on the application of exposure assessment and statistical concepts and techniques. The goal is to provide the student with the tools needed to manage the often intimidating task of evaluating and prioritizing chemical exposure assessments and interpreting industrial hygiene data in a statistical and defensible manner. Some industrial hygiene experience is an essential prerequisite, and some previous statistics coursework is helpful. However, the potentially complex concepts are described and practiced in a manner to equip the student with the knowledge and confidence to apply the skills that are learned. Traditional as well as innovative and practical approaches are discussed, with many opportunities for class participation and numerous hand-on exercises. A laptop with Microsoft Excel software is recommended.
|Classroom||Feb 20, 2020 - 8:00 AM - 5:00 PM||San Francisco, CA|